EN
M12 All-Metal Flush Inductive Proximity Sensor – 2mm Shielded Detection (0-1.6mm Reliable, No Range Loss), Stainless Body & Face, DC 3-Wire/4-Wire NO/NC/NO+NC, BILN2-GM12 Series
M12 all-metal flush inductive proximity sensor — 2mm detection, reliable 0-1.6mm, NO range loss vs standard M12 flush. Stainless body and metal face resist impact, weld spatter and washdown. NC (BILN2-GM12-N2) and NO+NC dual-output (BILN2-GM12-N3) models. Embeddable flush, M12×1. For welding cells, washdown lines. BXUAN factory direct.
- Overview
- Related Products
| profile data | M12*1mm | ||
| Installation method | Flushed | ||
| Detection distance | 2mm±10% | ||
| Reliable detection distance | 0-1.6mm | ||
| DC 3- wire / DC 4-wire | NPN | NO | BILT2-GM12-N1 |
| NC | BILT2-GM12-N2 | ||
| PNP | NO | BILT2-GM12-P1 | |
| NC | BILT2-GM12-P2 | ||
| DC 2 wire | NO | BILT2-GM12-D1 | |
| NC | BILT2-GM12-D2 | ||
| AC 2-wire | NO | BILT2-GM12-A1 | |
| NC | BILT2-GM12-A2 | ||
| Supply voltage | DC 3-wire：DC10-30V | ||
| DC 2-wire：DC10-30V | |||
| AC 2-wire：AC20-250V | |||
| Voltage drop | DC 3-wire：<1.5V | ||
| DC 2-wire：<6V | |||
| AC 2-wire: <8V | |||
| load current | DC 3-wire：<200mA | ||
| DC 2-wire：<200mA | |||
| AC 2-wire：300mA | |||
| Current consumption | DC 3-wire：<10mA | ||
| DC 2-wire：<0.8mA | |||
| AC 2-wire：<2.5V | |||
| Leakage current | DC 3-wire：<0.01mA | ||
| DC 2-wire：<0.8mA | |||
| AC 2-wire：<2.5V | |||
| Insulation voltage | DC 3-wire：1000V/AC 60S | ||
| DC 2-wire：1000V/AC 60S | |||
| AC 2-wire：2000V/AC 60S | |||
| switching frequency | DC 3-wire：1000Hz | ||
| DC 2-wire：800Hz | |||
| AC 2-wire：25Hz | |||
| Short circuit protection/reverse connection protection | DC 3-wire：have/have | ||
| DC 2-wire：have/have | |||
| AC 2-wire： | |||
| indicator light | Red LED | ||
| Degree of protection | Ip67 | ||
| Shell material | stainless steel | ||
| Test surface material | stainless steel | ||
| Connection mode | M12 connector | ||
