EN
M18 Flush Analog Proximity Sensor – 5mm Shielded Continuous Detection (0-4.6mm Reliable), 0-10V (BILT5-GM18-U) / 4-20mA (BILT5-GM18-I), Flush Mount
M18 flush analog proximity sensor — 5mm±10% continuous detection, reliable 0-4.6mm. 0-10V (BILT5-GM18-U) and 4-20mA (BILT5-GM18-I) outputs track target distance for position, level, thickness and gap control. Flush shielded, embeddable in metal, M18×1. Red LED, protected circuits. BXUAN factory direct.
- Overview
- Related Products
| rofile data | M18*1mm | ||
| Installation method | Flushed | ||
| Detection distance | 5mm | ||
| Reliable detection distance | 0-4.6mm | ||
| DC 3- wire / DC 4-wire | NPN | NO | BILF5-GM18-N1 |
| NC | BILF5-GM18-N2 | ||
| NO+NC | BILF5-GM18-N3 | ||
| PNP | NO | BILF5-GM18-P1 | |
| NC | BILF5-GM18-P2 | ||
| NO+NC | BILF5-GM18-P3 | ||
| DC 2 wire | NO | BILF5-GM18-D1 | |
| NC | BILF5-GM18-D2 | ||
| AC 2-wire | NO | BILF5-GM18-A1 | |
| NC | BILF5-GM18-A2 | ||
| Supply voltage | DC 3-wire：DC10-30V | ||
| DC 2-wire：DC10-30V | |||
| AC 2-wire：AC20-250V | |||
| Voltage drop | DC 3-wire：<1.5V | ||
| DC 2-wire：<6V | |||
| AC 2-wire: <8V | |||
| load current | DC 3-wire：<200mA | ||
| DC 2-wire：<200mA | |||
| AC 2-wire：300mA | |||
| Current consumption | DC 3-wire：<10mA | ||
| DC 2-wire：<0.8mA | |||
| AC 2-wire：<2.5V | |||
| Leakage current | DC 3-wire：<0.01mA | ||
| DC 2-wire：<0.8mA | |||
| AC 2-wire：<2.5V | |||
| Insulation voltage | DC 3-wire：1000V/AC 60S | ||
| DC 2-wire：1000V/AC 60S | |||
| AC 2-wire：2000V/AC 60S | |||
| switching frequency | DC 3-wire：1000Hz | ||
| DC 2-wire：800Hz | |||
| AC 2-wire：25Hz | |||
| Short circuit protection/reverse connection protection | DC 3-wire：have/have | ||
| DC 2-wire：have/have | |||
| AC 2-wire： | |||
| indicator light | Red LED | ||
| Degree of protection | Ip67 | ||
| Shell material | Nickel Plated Brass | ||
| Test surface material | PBT | ||
| Connection mode | 30cm PVC cable with M12 connector | ||
