ALL PRODUCTS

F54 series ultrasonic distance sensor

• Non contact measurement: Ultrasonic sensors can measure without touching objects, avoiding physical contact with the target object and reducing the possibility of wear and damage. High precision measurement: Ultrasonic sensors have high measurement accuracy and can achieve precise measurements at the millimeter or sub millimeter level.

Overview
Related Products

Product model	UCX50-F54-D4-H5	UCX200-F54-D4-H5	UCX50-F54-D6-H5	UCX200-F54-D6-H5
	UCX50-F54-D5-H5	UCX200-F54-D5-H5	UCX50-F54-D7-H5	UCX200-F54-D7-H5
Detection range	50...500mm	80...2000mm	50...500mm	80...2000mm
Non-detection zone	0mm ..50mm	0mm ..80mm	0mm ..50mm	0mm ..80mm
Transducer frequency	About 380KHz	About 180KHZ	About 380KHz	About 180KHZ
response time	About 50ms	About 150ms	About 50ms	About 150ms
Standard target version	≤8Hz	≤ 2.7Hz	≤8Hz	≤2.7Hz
type of output	D4 :NPN normally open/normally closed D6：2 switch outputs PNP, NO/NC, programmable
	D5：PNP normally open/normally closed D7：2 switch outputs NPN, NO/NC, programmable
working voltage	10-30V DC ripple 10%
Rated working current	200mA Passage/overload protection		2 x 100 mA , short- circuit/overload protected
Repetition accuracy of	≤ 0.5%		≤ 0.1%
Range adjustment	Adjust the farthest and nearest range through the adjusting line
Degree of protection	IP65
Connection mode	Connector plug M12 x 1 , 5-pin/2m PVC cable
LED yellow light	The yellow light of the switch status indicator flashes. The target is detected under the set status
LED red light	The red light is always on: error Red light flashing: no target is detected in the set state