EN
F36 series ultrasonic displacement sensor
Detect various transparent and reflective materials, such as glass bottles, glass plates, transparent PP/PE/PET films, and reflective materials. Ultrasonic sensors can perform well in detecting gold foil, silver foil, and other materials
- Overview
- Related Products
| Product model | UCX50-F36-D6-H4 | UCX100-F36-D6-H4 | UCX200-F36-D6-H4 | ||
| UCX50-F36-D7-H4 | UCX100-F36-D7-H4 | UCX200-F36-D7-H4 | |||
| Detection range | 50..500mm | 70..1000mm | 80...2000mm | ||
| Non-detection zone | 0...50mm | 0...70mm | 0mm ..80mm | ||
| Transducer frequency | About 380KHz | About 205KHz | 180KHZ | ||
| response time | 50ms | About 125ms | About 150ms | ||
| Standard target version | ≤7Hz | ≤ 2.5Hz | ≤ 1Hz | ||
| type of output | D6：2 switch outputs PNP, NO/NC, programmable | ||||
| D7：2 switch outputs NPN, NO/NC, programmable | |||||
| Rated working current | 200mA Passage/overload protection | ||||
| accuracy of rated working | ≤ 0.5% | ||||
| working voltage | 10-30V DC ripple 10% | ||||
| Range adjustment | Adjust the farthest and nearest range through the adjusting line | ||||
| Degree of protection | IP65 | ||||
| Connection mode | Connector plug M12 x 1 , 4-pin/2m PVC cable | ||||
| LED yellow light | The yellow light of the switch status indicator flashes. The target is detected under the set status | ||||
| LED red light | The red light is always on: error Red light flashing: no target is detected in the set state |
||||
