EN
BPS Connector Type Photoelectric Sensor E3F Compatible
BPS series cylindrical photoelectric sensor with connector type quick connection, E3F compatible, yellow sealed housing, reliable detection for counting, positioning and presence detection in industrial automation.
- Overview
- Related Products
| Model | NPN Output | BPS-QO15M | BPS-QO10M | BPS-KO5M | BPS-CO3M | BPS-CO30 | BPS-CO10 |
| PNP Output | BPS-QR15M | BPS-QR10M | BPS-KR5M | BPS-CR3M | BPS-CR30 | BPS-CR10 | |
| Sensing method | Through-beam | Retro-Reflection | Diffuse Reflection | ||||
| Sensing Range | 15M | 10M | 5M | 3M | 300mm | 100mm | |
| Sensing target | Opaque materials, translucent materials | ||||||
| Hysteresis | ≤20% of Sensing Range | ||||||
| Response time | Max. 1ms | ||||||
| Sensitivity adjustment | YES (Adjuster) | ||||||
| Operation mode | Light ON mode - Dark ON mode selectable (Control wire) | ||||||
| Indicator | Visible red light | ||||||
| Power supply | 12-24 VDC ±10%(ripple P-P: 10%) | ||||||
| Current consumption | ≤45mA | ||||||
| Control output | NPN open collector output / PNP open collector output model | ||||||
| Load voltage | ≤30V DC | ||||||
| Load current | ≤200mA | ||||||
| Residual voltage | NPN:1VDC , PNP:2.5 VDC | ||||||
| Protection circuit | Reverse power protection circuit, output short overcurrent protection circuit | ||||||
| Insulation resistance | ≤20 MΩ(500 VDC megger) | ||||||
| Noise immunity | ± 240 VDC the square wave noise (pulse width: 1 μs) by the noise simulator | ||||||
| Dielectric strength | 1,000 VAC~ 50/60 Hz for 1 min | ||||||
| Vibration | 1.5 mm double amplitude at frequency of 10 to 55 Hz (for 1 min) in each X, Y Zdirection for 2 hours | ||||||
| Ambient illuminance (receiver) | Sunlight:≤11,000 lx, incandescent lamp: ≤3,000 lx | ||||||
| Ambient temperature | -10 to 60 ℃, storage: -25 to 75 ℃ (no freezing or condensation) | ||||||
| Ambient humidity | 35 to 85 %RH, storage: 35 to 85 %RH (no freezing or condensation) | ||||||
| Protection rating | IP67 | ||||||
| Connection | connector type | ||||||
| Cable spec. | M12 connector 4PIN | ||||||
| Material | Case: Brass, Ni-plate | ||||||
| Sensing part: PC lens | |||||||
