EN
BPR series Dc power, Solid state output Through-beam Type
AC/DC power, Relay contact output, Diffuse reflection Type
- Overview
- Related Products
| Sensing method | Through-beam | ||||
| Model | NPN | BPR-SC40M | BPR-SC5M | BPR-QC40M | BPR-QC5M |
| PNP | BPR-SF40M | BPR-SF5M | BPR-QF40M | BPR-QF5M | |
| Sensing distance | 40M | 5M | 40M | 5M | |
| Standard sensing object | Opaque: 17-mm dia. min. | ||||
| Differential travel | -------- | ||||
| Directional angle | Both Emitter and Receiver 3° min | ||||
| Light source (wavelength) | Red LED (624 nm) | Infrared LED (850 nm) | |||
| Power supply voltage | 10 to 30 VDC, including ripple (p-p): 10% | ||||
| Power consumption |
DC | 40 mA max. (Emitter 25 mA max. Receiver 15 mA max.) | |||
| AC | -------- | ||||
| Control output | Load power supply voltage: 30 V max., Load current: 100 mA max., Residual voltage: 3 V max., opencollector output (NPN/PNP output depending on model), Light-ON/Dark-ON selectable |
||||
| Protection circuits | Power supply reverse polarity protection, Output short-circuit protection, and Output reverse polarity protection | ||||
| Life expectancy (relay output) |
Mechanical | -------- | |||
| Electrical | -------- | ||||
| Response time | 1 ms max | ||||
| Sensitivity adjustment | One-turn adjuster | ||||
| Ambient illumination (Receiver side) |
Incandescent lamp: 3,000 lx max., Sunlight: 11,000 lx max. | ||||
| Ambient temperature range | Operating: −25°C to 55°C, Storage: −40°C to 70°C (with no icing or condensation) | ||||
| Ambient humidity range | Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) | ||||
| Insulation resistance | 20 MΩ min. at 500 VDC | ||||
| Dielectric strength | 1,500 VAC, 50/60 Hz for 1 min | ||||
| Vibration resistance |
Destruction | 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions | |||
| Malfunction | 10 to 55 Hz with a 1.5 mm double amplitude for 2 hours each in X, Y, and Z directions | ||||
| Shock resistance |
Destruction | 500 m/s2 for 3 times each in X, Y, and Z directions | |||
| Malfunction | 500 m/s2 for 3 times each in X, Y, and Z directions | ||||
| Degree of protection | IP64 | ||||
| Connection method | Pre-wired (standard length: 2 m) | ||||
| Material | Case | ABS (Acrylonitrile Butadiene Styrene) | |||
| Lens/Display window |
Methacrylic resin | ||||
| Adjuster | POM | ||||
| Cable | PVC | ||||
