EN
TL-Q5M Series Square Proximity Switch – 5mm Flush Detection (Reliable 0-4mm), Compact Q-Series Body, 500Hz High-Speed, DC 3-Wire NPN (C1/C2), PNP (B1/B2) & DC 2-Wire (D1/D2)
TL-Q5M series compact square inductive proximity switch — 5mm flush detection, reliable 0-4mm, 500Hz / 2ms fast response. Six-model matrix: NPN C1/C2, PNP B1/B2, DC 2-wire D1/D2. 12-30VDC, open-collector 50mA, red LED, -25~70°C, ~90g, 2m cable. For pick-and-place, counting, small machines. BXUAN factory direct.
- Overview
- Related Products
| Installation method | Flushed | ||
| Detection distance | 5mm | ||
| Reliable detection distance | 0...4mm | ||
| DC 3- wire | NPN | NO | TL-Q5MC1 |
| NC | TL-Q5MC2 | ||
| PNP | NO | TL-Q5MB1 | |
| NC | TL-Q5MB2 | ||
| DC 2-wire | NO | TL-Q5MD1 | |
| NC | TL-Q5MD2 | ||
| Differential travel | 10% max. of sensing distance | ||
| Detectable object | Ferrous metal | ||
| Standard sensing object | Iron, 15 × 15 × 1 mm | ||
| Response time | 2 ms max. | ||
| Response frequency | 500 Hz | ||
| Power supply voltage (operating voltage range) | 12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max. | ||
| Current consumption | 10 mA max. at 24 VDC | ||
| Control output |
Load current | TL-Q5MC@: NPN open collector, 50 mA max. at 30 VDC max. TL-Q5MB@: PNP open collector, 50 mA max. at 30 VDC max. |
|
| Residual voltage | 1 V max. (under load current of 50 mA with cable length of 2 m) | ||
| Indicators | Detection indicator (red) | ||
| Operation mode | B1/C1 Models: NO C2 Models: NC |
||
| Refer to the timing charts under DC 3-Wire Models on page 7 for details. | |||
| Protection circuits | Reverse polarity protection, Surge suppressor | ||
| Ambient temperature range | Operating/Storage: −25 to 70°C (with no icing or condensation) | ||
| Ambient humidity range | Operating/Storage: 35% to 95% (with no condensation) | ||
| Temperature influence | ±20% max. of sensing distance at 23°C in the temperature range of −25 to 70°C |
||
| Voltage influence | ±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range | ||
| Insulation resistance | 5 MΩ min. (at 500 VDC) between current-carrying parts and case |
||
| Dielectric strength | 500 VAC, 50/60 Hz for 1 min between current-carrying parts and case |
||
| Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||
| Shock resistance | Destruction: 200 m/s2 10 times each in X, Y, and Z directions | ||
| Connection method | Pre-wired Models (Standard cable length: 2 m) | ||
| Weight (packed state) | Approx. 90 g | ||
