232 interface ultrasonic liquid level sensor
Ultrasonic waves have a great ability to penetrate liquids and solids, especially in solids that are opaque to sunlight. Ultrasonic waves will produce significant reflections when encountering impurities or interfaces, forming echoes, and can produce Doppler effects when encountering moving objects. Ultrasonic sensors are widely used in industry, national defense, biomedical and other fields
- Overview
- Related Products
Product model | UBX200-GM30-IUR2-H5 | UBX400-GM30-IUR2-H5 | UBX600-GM30-IUR2-H5 | |
UBX200-GM30-E6R2-H5 | UBX400-GM30-E6R2-H5 | UBX600-GM30-E6R2-H5 | ||
Detection range |
80 ... 2000 mm | 200 ... 4000 mm | 350 ... 6000 mm | |
Non-detection zone |
0 ... 80 mm | 0 ... 200 mm | 0 ... 350 mm | |
Transducer frequency |
approx. 180 kHz | approx. 85 kHz | About 65KHz | |
response time | About 195 ms | 145 ms minimum 440 ms factory setting |
285 ms minimum 850 ms factory setting |
|
Standard target version | max. 30 Hz | max. 13 Hz | max. 7 Hz | |
type of output | IUR2:1 current output 4 ... 20 mA 1 voltage output 0 ... 10 V |
|||
E6R2:2 switch outputs PNP, NO/NC | ||||
interface type | RS 232, 9600 Bit/s , no parity, 8 data bits, 1 stop bit | |||
working voltage |
10-30V DC ripple 10% | |||
Rated working current |
200mA Passage/overload protection | 2 x 100 mA , short- circuit/overload protected |
||
Repetition accuracy of |
≤ 0.5% | ≤ 0.1% | ||
Range adjustment |
Adjust the farthest and nearest range through the adjusting line | |||
Degree of protection |
IP65 | |||
Connection mode | Connector plug M12 x 1 , 5-pin/2m PVC cable | |||
LED yellow light | The yellow light of the switch status indicator flashes. The target is detected under the set status | |||
LED red light | The red light is always on: error Red light flashing: no target is detected in the set state |